Safe, on-time delivery starts before the lorry arrives. Cargo that is properly packed, palletised, labelled and documented loads faster, travels without damage and is accepted at the destination without disputes. Most transport problems such as damaged goods, refused deliveries and missed slots trace back to preparation at the pickup point.
Packing and Palletising Basics
- Use the right pallet: sound, undamaged pallets sized to the load; treated or certified wood for export.
- Heavy at the bottom: place the heaviest, strongest cartons at the base.
- Stack in columns or an interlocking pattern: columns maximise carton strength; interlocking adds stability for lighter boxes.
- No overhang: cartons hanging over the pallet edge get crushed.
- Control the height: tall, narrow loads tip over. Keep the load stable and within the vehicle’s height.
- Wrap from the base: stretch-wrap the load and the pallet together; add corner boards and straps for heavy or tall loads.
- Separate fragile goods: never stack heavy items on fragile ones.
Labelling and Documents
- Label every pallet or package with consignee, delivery address, package number (for example 1 of 3) and handling marks.
- Prepare a delivery order and packing list that match the physical cargo.
- For goods going to port or airport, align marks with the commercial invoice (see our shipping documents checklist).
- Declare any dangerous goods with an MSDS before pickup.
Weight, CBM and Choosing the Right Lorry
A lorry’s usable payload is its BDM (Berat Dengan Muatan, maximum loaded weight) minus its BTM (Berat Tanpa Muatan, empty weight), so it is always less than the nominal size. A 5-tonne lorry with a 17-foot body, for example, typically carries up to about 4 tonnes of cargo.
| What to measure | How |
|---|---|
| Total weight | Sum of gross weights, including pallets and packaging |
| Volume (CBM) | Length × width × height in metres for each pallet or package, added together |
| Footprint | Number of pallets and their size, to check floor space |
| Handling | Forklift or tail-lift needed at pickup or delivery? |
See the lorry-size guide on our lorry transport page to match your load to a 3-tonne, 5-tonne or larger truck.
Not sure how to work out the volume? Our CBM calculation guide covers centimetres, inches and pallets, with worked examples.
Pre-Pickup Checklist
- Cargo packed, palletised, wrapped and labelled
- Weight and CBM confirmed and shared with the transporter
- Documents printed: delivery order and packing list (plus permits or MSDS if needed)
- Loading equipment and staff ready at the agreed time
- Access confirmed: gate passes, port release, loading bay booking
- Consignee contact and delivery window confirmed
Packaging by Cargo Type
| Cargo | Recommended packaging |
|---|---|
| Cartoned consumer goods | Double-wall cartons, palletised and stretch-wrapped |
| Machinery and heavy parts | Wooden crate or skid, bolted or strapped, lifting points marked |
| Drums and liquids | Sealed drums on pallets, strapped; DG declared if hazardous |
| Fragile items (glass, ceramics) | Cushioning, corner protection, fragile and orientation marks, loaded on top |
| Chilled or frozen goods | Pre-cooled product, insulated packaging, refrigerated truck at the right setting |
Collecting Cargo from Ports
For pickups inside Port Klang (Northport or Westport), the lorry can only collect once the cargo is released. Have the release documents, delivery order and any port gate pass ready before booking the slot, and share the warehouse or terminal location exactly as it appears on the release. A missing release is one of the most common reasons a lorry waits or leaves empty.
For the release documents, timing and charges involved in collecting from Port Klang, see our guide to cargo pickup at Northport and Westports.
Checks at Delivery
- Count packages against the delivery order before signing.
- Note any visible damage on the proof of delivery (POD), with photos.
- Report shortages or damage to the transporter the same day.
- For high-value goods, arrange in-transit insurance before shipping.
Noting damage on the delivery note protects your claim, but only if you are insured. Our guide to cargo insurance in Malaysia explains what is covered and how to claim.
Common Mistakes That Cause Damage or Delays
| Mistake | Result |
|---|---|
| Underestimating weight | Wrong lorry sent; overloading or a second trip |
| Loose, unwrapped cartons | Shifting load and crushed goods |
| No port release or gate pass ready | Lorry waits or leaves empty |
| Wrong or missing consignee contact | Failed delivery and re-delivery charges |
| Undeclared dangerous goods | Cargo refused and a safety risk |
Frequently Asked Questions
How should goods be palletised for lorry transport?
Stack heavier cartons at the bottom in a tight, column or interlocking pattern, keep the load within the pallet edges, limit the height so the pallet is stable, and stretch-wrap it from the base up, including the pallet itself. Use corner boards and strapping for heavy or tall loads.
What information does a transport company need to book a lorry?
Pickup and delivery addresses, cargo description, total weight, volume in CBM, number of pallets or packages, any special handling needs, loading equipment available on site, and the required delivery date and contact person.
How do I know which lorry size I need?
Compare your cargo weight and volume with the lorry’s payload (BDM minus BTM) and body size. For example, a 5-tonne lorry with a 17-foot body usually carries up to about 4 tonnes of cargo. Your transport provider should recommend the size from your details.
What causes cargo damage during transport?
Most damage comes from poor stacking, overhanging cartons, loose loads without wrapping or strapping, weak packaging for the weight, and mixing heavy and fragile goods on the same pallet.
Ready to book? Share your weight, CBM and addresses to book a lorry for transport across West Malaysia with De Hubs.
